Request research access

MICROSCOPY HARDWARE / 3D-PRINTED

Small hardware.
Specific jobs.

Micrensa produces practical 3D-printed accessories for smartphone microscopy and low-light microplate imaging setups.

Discuss a hardware requirement

Universal smartphone adapter

149 €

An adjustable 3D-printed adapter made to accommodate different smartphone sizes in a microscope-camera setup.

  • FIT Adjustable smartphone positioning
  • USE Microscope imaging and acquisition
  • BUILD 3D-printed construction
Universal smartphone adapter mounted on a microscope with a phone held above the eyepiece
PRODUCT RENDER / UNIVERSAL SMARTPHONE ADAPTER / MICROSCOPE SHOWN FOR CONTEXT

Easy smartphone adapter

199 €

A model-specific adapter tailored to one smartphone. Once aligned for that device, the phone slides into a repeatable position.

  • FIT Tailored to a selected smartphone model
  • USE Slide-in positioning for repeat setup
  • BUILD Made as a device-specific printed part
Easy smartphone adapter mounted on a microscope with a phone held above the eyepiece
PRODUCT RENDER / EASY SMARTPHONE ADAPTER / MICROSCOPE SHOWN FOR CONTEXT

Bioluminescence-colorimetry imager*

1 299 €

Bring microplate imaging into a dedicated, light-insulated setup. The black enclosure shields the plate from ambient light and positions a camera objective above it for bioluminescence and colorimetry imaging.

  • PLATE Dedicated microplate imaging chamber
  • LIGHT Light-insulated black enclosure
  • OPTICS Camera-objective opening above the plate
ILLUSTRATIVE FORM STUDY / NOT TO SCALE / FINAL GEOMETRY MAY VARY

Start with the device and optical setup.

Adapter suitability depends on the smartphone model and microscope configuration. The easy adapter is tailored to one phone model; the universal version is adjustable. Prices are shown in euros. Contact Micrensa to confirm compatibility, availability, shipping and any applicable taxes before ordering.

* Contact us to discuss the intended microplate, camera and objective setup.

Discuss your setup